- ZINGA
- Aquazinga
- Monoprimer
- Zingaspray
- Aluspray
- Zingaluspray
- Alufer N
- Alufer WR
- PU Tarfree MIO
The film galvanising system ZINGA® is a one pack coating that contains 96% zinc in the dry film and provides cathodic protection to ferrous metals. It can be used as a unique system as an alternative to hot-dip galvanisation or metallisation, as primer in a duplex system or as a recharging system for hot-dip galvanisation or metallisation. It can be applied by brushing, rolling or spraying on a clean and rough substrate in a wide range of atmospheric circumstances. ZINGA® is also available as an aerosol and is sold as Zingaspray.
Aquazinga is a 2 pack 100% water-based anti-corrosion system based on inorganic zinc silicates. Due to its high zinc content in the dry film (92%) it provides cathodic protection to ferrous metals. It can be used as a stand alone system as an alternative to hot-dip galvanisation or metallisation. Aquazinga has an excellent resistance to abrasion and is designed to withstand corrosive environments and severe conditions, including high temperatures (up to 600°C).
Monoprimer is a one component moisture curing polyurethane primer.It is an ideal product to treat:
- sand blasted as well as
- manually derusted surfaces.
Its lamellar structure together with its moisture curing properties provides a very good impermeability and keeps water and oxygen away from the surface underneath it.
We advise the use of this product where complete derusting isn´t possible (e.g.: old bridges, pylons,…).
The film galvanising system Zingaspray is a coating that contains 96% zinc in the dry film and provides cathodic protection to ferrous metals. It is ideal for the repairing and touching-up of damaged or old hot-dip galvanisation, Zinga and other zinc systems.
Aluspray is based on based on aluminium flakes. It can be applied either without primer on an old, non-corroded hot-dip galvanisation or metallisation layer or as topcoat on top of Zinga.Aluspray is mainly applied for esthetical reasons as it gives a nice aluminium aspect.
Zingaluspray is an anti-rust protection and welding coating with galvanic features and full cathodic protection. It is ideal for the repairing and touching-up of damaged or old hot-dip galvanisation, Zinga and other Zinc systems.
Alufer N is a moisture curing one pack polyurethane. Micaceous iron oxides create the special lamellar structure which create a very tight paint film
→ excellent water and corrosion resistance.
Alufer N can be applied as an intermediate and/or topcoat on Zinga.
Alufer N can be used for immersion in water, sea water and several chemicals.
→ excellent water and corrosion resistance.
Alufer N can be applied as an intermediate and/or topcoat on Zinga.
Alufer N can be used for immersion in water, sea water and several chemicals.
Alufer WR is a one pack moisture curing polyurethane, pigmented with micaceous iron which can be applied on Alufer N or directly onto Zinga.
The advantages of this product are:
The advantages of this product are:
- resistance to abrasion and chemicals
- dirt repellent
PU Tarfree MIO is a one-pack moisture curing polyurethane paint.
Its advantages:
Its advantages:
- excellent water and corrosion resistance (thanks to the MIO particles).
- high chemical resistance.
These properties make PU Tarfree MIO the ideal product to replace normal coal tar products.
PU Tarfree MIO is especially recommended for immersion circumstances (seawater).
